As winding equipment for metal wire, the wire take-up machine is widely used. In terms of materials, steel bars Q235, Q195, copper wires, aluminum wires, alloy wires, cored wires, etc., can all be wound by a wire take-up machine.
The wire take-up machine can be divided into an electrical part and a mechanical part. The electrical part also includes a control system and a power part. The control system is used as the control of the wire take-up machine to operate the start-stop and speed regulation of the wire The take-up machine provides power.
The mechanical part is composed of a take-up reel and a base.
Depending on the model and type of the wire take-up machine, the motors equipped are also different. There are three commonly used three-phase asynchronous motors, variable frequency motors, and torque motors.
In the common I-wheel take-up machine, if the closing weight is less than two tons, you can choose a torque motor, which is also a motor that is more suitable for take-up. It has a large torque, and when the resistance reaches a certain value, the motor will reduce. The rotating speed ensures a certain torque to keep the winding tight.
The three-phase asynchronous motor can be used in the winding machine of more than one ton. It is used in conjunction with the reducer, and the winding speed remains the same before and after.
The wire take-up machine can also use frequency conversion motors, which are often used to collect metal wires with small diameters. During the winding process, the speed needs to be changed to achieve the purpose of winding neatly.
It is usually equipped with a frequency converter, set certain parameters, and when it reaches a certain range, the frequency will automatically change, so as to change the speed of the wire take-up machine. Therefore, what type of motor to choose for the wire take-up machine depends on the weight of the wire and the material of the metal wire.
