The water tank wire drawing machine can be effectively divided into flip water tanks and heavy water tanks during operation. To a certain extent, it is very suitable for drawing various metal wires of medium and fine specifications.
It is especially suitable for drawing medium, medium, and low wires during use. Carbon steel wire, steel cord, titanium and other alloy wires, galvanized iron wire, copper wire aluminum wire, etc.
During the production process, the water tank wire drawing machine is mainly a small continuous production equipment composed of multiple drawing heads. During operation, it is mainly used for step-by-step drawing, effectively placing the drawing heads in the water tank. Pull the wire to the desired gauge.
Judging from several major domestic water tank wire drawing machine manufacturers, they are generally equipped with about 20 drawing heads.
The water tank wire drawing machine will be effective to a certain extent. After each stage of drawing, the wire diameter of the steel wire will change. When used, the working line speed of each drawing head should also be Variety.
During the entire drawing process, only one motor is driven through a mechanical transmission or gearbox. Depending on the configuration of the drawing die, the drawing speed of each drawing head also changes. The benchmark of the drawing speed is that the flow volume per second of the steel wire passing through the drawing die remains unchanged at each moment.
The working speed of each drawing head in the water tank wire drawing machine is based on the above formula to a certain extent, so that it can effectively ensure the synchronous operation of each drawing head to a certain extent.
Because the drawing process of the water tank wire drawing machine is completely completed by mechanical shaft drawing, and these mechanical shafts are driven under the same main shaft.
Therefore, the different levels of the entire stretching system rely on the difference in rotational speed of the stretching wheel and the online tension to control synchronous and coordinated work.
During the operation of the water tank wire drawing machine, coolant is needed for heat dissipation. During the operation, the take-up part will be driven by a small-power motor. It is necessary to keep the line tension constant during rewinding. If the tension fluctuates in a section, the winding on the winding I-wheel will be uneven.
