What are the installation positions and usage processes of the inverted wire drawing machine?
Before installing the inverted wire drawing machine, you need to choose the appropriate position, then choose the equipment and place it on stable ground, and then install it effectively according to its instructions.
First of all, according to the anchor hole of the machine base, use suitable expansion screws to fix the pre-made cement foundation to make it fixed.
Then check whether the equipment can maintain a stable state and whether the auxiliary equipment is complete.
When the inverted wire drawing machine is tightening the equipment, it is necessary to pay attention to adjusting the position of the main machine. When operating, the center of the reel and the center of rotation of the trolley are in the same position. When using it, pay attention to adjusting the main machine. The trolley can keep smooth while moving back and forth.
Furthermore, it is also necessary to reasonably connect the electrical circuits of the equipment in accordance with the requirements of electricity consumption, without leakage or short circuit.
Some Precautions in the Use of Inverted Wire Drawing Machine
When heating during the wire drawing process, there will be a problem involved, that is, what range should be controlled in the temperature of the wire drawing liquid is reasonable.
In general, the temperature of the drawing liquid is generally controlled within the range of 65-85°. Of course, in actual work, it needs to be adjusted according to the actual situation.
As we all know, after the wire drawing liquid is heated, it will generally emit hot air in the wire drawing machine.
In general, the user of the inverted wire drawing machine needs to pay attention to such a problem during the operation process, that is to control the height of the wire drawing liquid below the center of the tower wheel shaft.
Moreover, the pH of the drawing oil used in the drawing machine should also be controlled within a reasonable range.
Otherwise, if it is too high, it may cause the copper wire to turn red, and it will also cause damage to the equipment and reduce its life.
Additionally, I would like to suggest to all users and friends that if the work requires drawing some particularly thin metal wires, it should be noted that the wire drawing machine equipment starts slowly and then accelerates slowly to avoid the problem of broken wires.
The operation of the inverted wire drawing machine has become more and more humanized, and it is all due to its reasonable planning and technology, especially the use of numerical control equipment, which makes the inverted wire drawing machine more automated and better able to meet the needs of users.
The changes in the body are obvious to all. Starting from its take-up trolley equipment, there may be only one large plate at first. After the steel bars fall into the large plate, it needs to be pulled out manually or mechanically, and then unloaded by a crane.