In the production process of the inverted vertical wire drawing machine, mainly consists of the drawing die base device, the pressure roller device, the reel device, the main body, the wire take-up device, the pre-alignment device, the main transmission device, the pneumatic systems, and electrical control systems, etc.
The inverted vertical wire drawing machine is more suitable for use on large, heavy, and thick wire rods, mainly for continuous production and processing. Although the take-up reel is relatively heavy, it still saves the time of the entire work.
Since the overall operation of the inverted vertical wire drawing machine is relatively simple, there is basically no noise during the operation, and the control system is simple and reliable.
Therefore, the entire production process is very safe, and the main thing is that daily maintenance is more convenient.
The inverted wire drawing machine uses a three-phase AC variable frequency motor to regulate the speed of the entire system, which can realize step-less adjustment and related smooth control.
Things to note when operating the inverted vertical wire drawing machine system
- The inverted wire drawing machine can effectively adjust the size of the wire and then install the wire drawing die on the wire drawing die frame.
- Turn on the power and operate according to its specified requirements.
- The operator should be very familiar with and understand the equipment and operate it in accordance with its regulations.
- When performing the pulling and threading action, someone must be in front of the operation panel to supervise. Other idle personnel should not approach the equipment to avoid danger.
- When the wire drawing machine is running, the inverted wire drawing machine manufacturer cannot exceed the maximum frequency of the frequency converter to avoid damage to its motor and transmission system.
- Pay attention to whether the cooling water circulation is normal and whether the cooling water temperature is normal.
Maintenance of inverted vertical wire drawing machine equipment system
- The wear of the drawing wheel and pressure wheel should be checked regularly, as well as whether the bolts are loose, etc.
- Lubricate the equipment in accordance with the regulations and check the electrical circuits every day to see if there are any problems.
