Because the inverted wire drawing machine has the dual functions of drawing and taking up wire, it will be more convenient for customers to use it and can reduce the number of parts. cost of.

There are also obvious differences in the structure between the two.

The inverted type is more complex, but the structure is complex but coordination of the mechanisms is still very good; the ordinary ones are relatively simple, and the ordinary main structures include motors, reducers, and coils.

It consists of a barrel and a frame; the difficulty of the assembly is also different between the two.

The inverted structure is complex, the assembly is also complex, the maintenance and use are also complex, and the maintenance requirements for the equipment are relatively high, and need to be followed carry out maintenance according to the maintenance manual developed by the manufacturer; ordinary ones are relatively simpler.

The inverted type can set different processing speeds according to actual processing requirements, and is simple and safe to operate; the ordinary type is a bit cheaper and occupies a smaller area.

When the equipment is pulling out wires, there will be problems such as abrasions, bruises, and scratches on the surface; when there are jumpers on the tower, it is necessary to polish the surface of the equipment cone wheel and correct the angle in time; when there is a groove mold on the tower the talon needs to be dismantled and then repaired.

When taking up and arranging wires and rubbing the edge of the take-up reel, you need to adjust the width of the cable and level the edge of the reel. If a certain part of the equipment causes damage to the wire, it needs to be repaired and adjusted in time.

When there are bruises between the reels, the reels need to be placed in a “T” shape. Bruises between reels require floor repairs, and a serious and responsible attitude is required to prevent overfilling of the reels.