Steel Wire Cold Drawn Wire Sand Belt Polishing Machine

Steel Wire Cold Drawn Wire Sand Belt Polishing Machine

The use of a Steel Wire Cold Drawn Wire Sand Belt Polishing Machine can provide a good method for de-rusting the surface of steel wire. It has no pollution to the environment during grinding, has good surface quality, stable speed, and is easy to achieve high-stability grinding and de-rusting.

The surface de-rusting of wire rod steel wire before drawing usually adopts a pickling process, which produces strong acid, strong corrosive pollutants, heavy metals, etc., which are harmful to the environment.

At present, it is widely used for de-rusting and descaling of wire rods,  steel wire, steel cords, steel wire rope, and welding wire before drawing and polishing to make bright wire products.

When the sand belt grinds the surface of the steel wire since the abrasive is coated on the basic body of the abrasive belt in a single layer, the particles are uniform, the contour of the blade is good, and the orientation is arranged, almost all the sand grains can participate in the grinding, and the grinding ability is strong, Good performance, coupled with the randomness of sand belt grinding during high-speed movement, makes the sand belt wear more uniform during grinding.

At the same time, the longer sand belt circumference makes the abrasive grains well-cooled without burning the steel wire.

Steel wire cold drawn wire sand belt polishing machine commonly used mesh number: 60 mesh, 120 mesh, 180 mesh

Steel wire cold drawn wire sand belt polishing machine other 80 mesh 100 mesh 150 mesh 240 mesh 320 mesh

YF Metal Tech recommends that the grit size of the sand belt be selected between 40 mesh and 600 mesh. The larger the mesh number, the smoother the surface of the steel wire. The 600 mesh grit can make the surface of the steel wire as smooth as a mirror. The steel wire can be directly plated with bright chrome or zinc.

The sand belt polishing machine produced by YF Metal Tech has a simple structure. It only takes 1 minute to replace two abrasive belts. The sand belt positioning system is simple and flexible. The debugging time is only 10 minutes. The sand belt will never move or slide during use.

YF Metal Tech’s sand belt polishing machine can increase the speed of low-carbon steel wire drawing and produce ordinary black iron wire.

Use a sand belt machine between the wire drawing machine and the shelling machine. Use a 60-mesh abrasive belt to form spiral stripes on the surface of the steel wire. The depth of the stripes is about 0.025mm. These nebulous stripes can make the steel wire carry more lubrication when it enters the mold. Powder, so the drawing speed is generally increased by 50%.

If the mold adopts nano-coating, the outlet speed of 2mm steel wire should reach at least 20m/s, and the outlet speed of 1mm steel wire should reach at least 30m/s. And the service life of the mold is usually 500 tons.

The sand belt polishing machine produced by YF Metal Tech is used to produce welding wire. The use of coating molds saves boron coating and drying and reduces the cost of welding wire by 100 yuan per ton.

The sand belt polishing machine produced by YF Metal Tech is used to produce stainless steel wire, which can avoid coating agents and drying, does not accept weather interference, and saves more than 50 yuan in cost.

The sand belt polishing machine produced by YF Metal Tech is used to produce high-carbon steel wire without pickling, which meets the requirements of environmental protection.